ML-CSA 4500 | 4G M2M Cell Signal Amplifier

ML-CSA 4500 | 4G M2M Cell Signal Amplifier

$425.00

The ONLY M2M Cell Signal Amplifer you’ll ever need. Boosts signal strength for ALL cell carriers. 4G LTE with 3G & 2G fall-back…

Multi-Link’s 4G M2M Cell Signal Amplifier connects directly to any M2M enabled cellular application or cellular device and provides up to 15dB gain in UPLINK signal strength. Designed exclusively for direct connect M2M applications, the ML-CSA 4500 boosts signal in 5 Bands: 700Mhz, 850Mhz, 1900Mhz, and 1700/2100Mhz which covers all North American Carrier frequency bands.

• 4G LTE with 3G & 2G Fall-Back
• 5-Band Signal Amplification
• Patented Passive Bypass Technology
• Patented Auto-gain and Oscillation Control
• Power-over-Coax Capability
• Variable Power Input Range: 8.0 – 32.0 VDC
• Plug & Play
• *NOT made for Cell Phones

ML-CSA 4500 Plug & Play Kit Includes

ML-CSA 4500 15dB Cell Signal Amplifier
Mag-Mount 2dBi Outdoor Antenna
AC Power Adapter Cable
Hardwire DC Power Adapter
SMA to SMA Cable Connector
User Guide

Product Description

The ONLY M2M Cell Signal Amplifer you’ll ever need. Boosts signal strength for ALL cell carriers. 4G LTE with 3G & 2G fall-back…

The ML-CSA 4500 4G M2M Cell Signal Amplifier is an ancillary “Plug & Play” device that connects in-line with any cellular-enabled router, modem, module, or gateway.  ML-CSA 4500 boosts UPLINK cell signal strength by up to 15dB to lock in your connection with cell towers.The ML-CSA 4500 outperforms a high gain yagi antenna 99% of the time in challenged cellular areas. A dependable cell connection is crucial for real time datacom applications, monitoring & control of remote assets.

The ML-CSA 4500 4G M2M Cell Signal Amplifier is superior to other cell amplifiers & hi-gain antennas:

  • Works with all North American Carriers
  • 4G LTE with 3G & 2G Fall-Back
  • Power over Coax Capable (Requires accessory)
  • Passive Bypass Technology is a fail-safe feature that is designed to allow the cell signal amplifier to bypass itself during loss of power, when a fault is detected, or when amplification is not needed. NO other device has this feature and it’s vital for applications that are mission-critical for safety, security & liability reasons, e.g. Fire & Security Alarms and Patient Monitoring.
  • Auto Gain & Oscillation Control will automatically adjust the gain and output power to provide signal consistency if a signal anomaly occurs and to prevent interference with the Carrier’s network. If amplification is not needed, the booster goes into Passive Bypass Mode.
  • Variable Input Power Ranges: +8.0 to 36.0 VDC which is beneficial for applications with a variety of power requirements.
  • Plug & Play
  • FCC & IC Certified and Carrier Pre-Approved

ML-CSA 3500 Cell Signal Amp Passive BypassPassive Bypass feature allows the amplifier to passively bypass itself and become merely a pass through cable during these occurrences:

  • When amplification is not necessary, e.g. existing cell signal strength is adequate
  • When connected cell device goes into “Stand-By” Mode
  • When there is a power loss to amplifier
  • When a fault is detected

Passive Bypass technology is useful in applications where the amplifier is mobile, moving in and out of poor signal areas. The amplifier will bypass itself when in close proximity to cell towers. This serves as a safeguard feature, completely eliminating any potential for disruption to the cell network.

This unique feature is also extremely useful in fire & security system installations where a connection with the antenna must always be maintained, even with loss of power.

In other applications, e.g. remote solar-powered equipment, the cell device alternates from “Stand-By” to “Active” modes, transmitting data as needed. ML-CSA 4500 is designed to stay in Passive Bypass Mode if the connected system is in “Stand-By” and become active when the connected system is “Active”.

Technical Specifications

  • Network compatible: 4G, LTE w/ 3g & 2G fail-over.  Supports Bands 2,4,5,13 & 17, GSM, GPRS, CDMA, HSPA, WCDMA
  • Frequencies: 698-716 MHz, 746-787 MHz, 824-894 MHz / 1850-1905 MHz, 1710-1755/2110-2155 MHz
  • Rated Uplink Max Output Power: 27dBm
  • Rated Downlink Max Output Power: -20dBm
  • Nominal RF gain: 15 dB idle
  • Current draw @ 12V: 275 mA (idle) – 1 A (max)
  • Input Power Requirement: 8.0 to 32.0 VDC (negative ground)
  • Input/output Impedance: 50 Ohms

Mechanical

  • Dimensions: L. 4.9” x W. 2.7” x H. 0.92” / 125mm x 68mm x 23.5mm
  • Weight: 226g / 0.5lb
  • Connector: SMA (F)

Environmental

  • Operating temperature: -40°C to +70°C / -40°F to +158°F
  • Storage temperature: -40°C to +85°C / -40°F to +185°F
  • Relative humidity Storage: 5% to 90%

 

Disclaimer Notification:
The ML-CSA 4500 4G M2M Cell Signal Amplifier is NOT designed to increase signal connectivity for cell phones or used to “broadcast” a cell signal within structures or vehicles.
Installation of this device requires knowledge of basic electrical and experience with installing electronic devices. We recommend seeking a professional installer if you are not accustomed to installing electronics or high tech devices. Installation of this device is at your own risk. For a booster to work at its best, the optimal target range for an incoming signal is between -45dB to -95dB.
Questions? Call us at 800-535-4651 or email marketing@multi-link.net for details!

Key Benefits

Key Features

Applications

Key Benefits

• One model for both Fixed & Mobile applications
• Safeguard features completely eliminate any potential for disruption to the cell network
• “PASSIVE BYPASS” technology keeps cell devices connected in vital applications
• Easily connect devices “in-line” for fast deployment

Key Features

• Plug & Play Direct Connect Device
• Works all North American carriers–4G LTE, 3G, 2G
• Patented Passive Bypass Technology
• Patented Auto Gain & Oscillation Control
• Variable Input Power Ranges: +8.0 to 36.0 VDC
• FCC & IC Certified and Carrier Pre-Approved

Applications

• Out-of-Band Network Access
• Cashless Payment
• Fire & Security
• Remote Telemetry/SCADA
• Telematics
• Telemedical
• Railway
• Energy & Utility Communications
• Oil & Gas
• Laptop Data Terminals
• Transportation
• Agriculture

Download ML-CSA 4500 User Manual (PDF)

Technical Specifications

Network compatible: 4G, LTE w/ 3g & 2G fail-over. Supports Bands 2,4,5,13 & 17, GSM, GPRS, CDMA, HSPA, WCDMA;
Frequencies: 698-716 MHz, 746-787 MHz, 824-894 MHz / 1850-1905 MHz, 1710-1755/2110-2155 MHz
Rated Uplink Max Output Power: 27dBm
Rated Downlink Max Output Power: -20dBm
Nominal RF gain: 15 dB idle
Current draw @ 12V: 275 mA (idle) – 1 A (max)
Input Power Requirement: 8.0 to 32.0 VDC (negative ground)
Input/output Impedance: 50 Ohms

Mechanical

Dimensions: L. 4.9” x W. 2.7” x H. 0.92” / 125mm x 68mm x 23.5mm
Weight: 226g / 0.5lb
Connector: SMA (F)

Environmental

Operating temperature: -40°C to +70°C / -40°F to +158°F
Storage temperature: -40°C to +85°C / -40°F to +185°F
Relative humidity Storage: 5% to 90%

You may also like…

All Surge Protection products are ON SALE NOW! Dismiss