CT6-POE-RJ45 | RJ45 POE SURGE PROTECTOR

Sale!

CT6-POE-RJ45 | RJ45 POE SURGE PROTECTOR

$65.00 $57.00

The CT6-POE-RJ45, by ITW Linx, is a point of use surge protector, and can be installed at the equipment end, or ahead of PoE injectors and mid-span devices. Use this POE surge protector for indoor light-industrial and telecommunications systems. Also used on wifi access points and IP cameras to ensure protection from lightning, induction and AC infrastructure generated surges.

Package Includes:
One (1) CT6-POE-RJ45
Two (2) mounting screws

  • Compact design for convenient and effective surge protection
  • Solid state technology
  • Balanced signal protection ensures unobstructed pass though signal integrity
  • RJ45 In/Out connections
  • Side-by-Side installation capability minimizes space and enhances grounding
  • Exceeds TIA/EIA Standards 568 and 758 for CAT6 signal performance
  • UL listed 497 & 497B
SKU: CT6-POE-RJ45 Category: Tags: , ,

Product Description

The CT6-POE-RJ45, by ITW Linx, is a point of use surge protector, and can be installed at the equipment end, or ahead of PoE injectors and mid-span devices. Use this POE surge protector for indoor light-industrial and telecommunications systems. Also used on wifi access points and IP cameras to ensure protection from lightning, induction and AC infrastructure generated surges.

Proper installation will achieve maximum protection capability and ensure that networks and equipment connected to it are reliable and sustainable.

CT6-POE-RJ45 Features

  • Compact design for convenient and effective surge protection
  • Solid state technology
  • Balanced signal protection ensures unobstructed pass though signal integrity
  • RJ45 In/Out connections
  • Side-by-Side installation capability minimizes space and enhances grounding
  • Exceeds TIA/EIA Standards 568 and 758 for CAT6 signal performance
  • UL listed 497B

The protector shall be installed in accordance with the applicable requirements of the National Electric Code, ANSI/NFPA-70. Never install communications wiring during a lightning storm. For Indoors installation only.

CT6-POE-RJ45 Installation Directions

1. Make sure the voltage, signaling characteristics and network configuration are suitable with CT6-POE-RJ45 specifications.
2. Confirm network and network equipment are operating properly before installation of surge protection device.
3. Do not install surge protection device while the power is ON.
4. CT6-POE-RJ45 should be mounted on a suitable flat surface utilizing the two (2) supplied screws through the attached mounting tabs. Connect a 14 AWG (minimum)
grounding wire to the integrated grounding screw on protector. Continue to the nearest qualified grounding connection, making sure the wire is as straight and as short as possible.
5. Connect the input of equipment to be protected to the equipment side of CT6-POE-RJ45, utilizing proper RJ45 cable.
6. Connect the source RJ45 cable to the line side of CT6-POE-RJ45.
7. Turn power ON and make sure all equipment is operating properly.

 

ELECTRICAL CHARACTERISTICS:

  • (PoE) (PoE+) (PoE++/UPoE) Capable: Yes
  • Category/Signal: CAT6
  • Voltage Clamping Level: 75VDC
  • Balanced Over Voltage: Yes
  • Modes of Protection: Across all pairs and ground
  • Surge Response Time: <5 Nanoseconds
  • Capacitance: <5 pF
  • Capacitive Imbalance: <1 pF
  • Max Continuous Current: 1.5 Amps (per pair)

MECHANICAL CHARACTERISTICS:

  • Enclosure: Model ABS V0
  • Environmental Rating: Indoors
  • Operating Temperature: -40°C to +65°C
  • Operating Humidity: 0 to 95% non-condensing
  • Mounting: Surface
  • Connection Method: RJ45 Jack In and Out
  • Enclosure Dimension (L x W x H): 4.75″ x 4.75″ x 1.75″
  • Weight: 0.5 lbs
  • Grounding Connection: Integrated Screw Terminal

 

Download ITW CT6-POE-RJ45 Spec Sheet (PDF)
Download ITW CT6-POE-RJ45 User Manual (PDF)

 

You may also like…